dyno: 400+whp pump gas single cam
#27
Honda-Tech Member
Join Date: Aug 2006
Location: Windsor Mill, MD, US
Posts: 192
Likes: 0
Received 0 Likes
on
0 Posts
#28
Honda-Tech Member
Join Date: Aug 2006
Location: Windsor Mill, MD, US
Posts: 192
Likes: 0
Received 0 Likes
on
0 Posts
Re: dyno: 400+whp pump gas single cam
I thought it put down more power the first time Joe. Did a 12.33 @ 112 on dr's.
Should get some good times with an extra 150hp/100tq and alot of meat.
Should get some good times with an extra 150hp/100tq and alot of meat.
#30
Honda-Tech Member
Re: dyno: 400+whp pump gas single cam
#31
Honda-Tech Member
Thread Starter
Re: dyno: 400+whp pump gas single cam
i have so many dyno graphs saved...i need to organize them a little better haha
#32
Honda-Tech Member
Join Date: Sep 2007
Location: Tampa, Fl, united states
Posts: 837
Likes: 0
Received 0 Likes
on
0 Posts
#33
Honda-Tech Member
Join Date: May 2008
Location: Sykesville, MD, USA
Posts: 3,032
Likes: 0
Received 0 Likes
on
0 Posts
Re: dyno: 400+whp pump gas single cam
im trying to talk a buddy into coming up from VA to go to tempest for a tune in his a6/y7 combo. gonna have a bisi cam aswell but a ported head with OS valves
#34
Honda-Tech Member
Join Date: Aug 2006
Location: Windsor Mill, MD, US
Posts: 192
Likes: 0
Received 0 Likes
on
0 Posts
Re: dyno: 400+whp pump gas single cam
They rub, a 90 degree turn like into a parking space is a 3 point turn now. Without extended wheelstuds and spacers the inside side wall rubbed on the coil over.
#37
Honda-Tech Member
Join Date: Aug 2006
Location: Windsor Mill, MD, US
Posts: 192
Likes: 0
Received 0 Likes
on
0 Posts
Re: dyno: 400+whp pump gas single cam
It wont rub the coil overs, they will still rub everything else. I cut some the bumper away in front of the tire as well.
Thread
Thread Starter
Forum
Replies
Last Post
yusoslo
Forced Induction
18
03-28-2004 09:14 AM