Hasport clutch master adapter help
#1
Honda-Tech Member
Thread Starter
Hasport clutch master adapter help
i have a 91 dx hatch that ive swapped a b16 into. im using a 97 gsr hydro trans. well i bought the hasport clutch master adapter and mounted it under the battery tray. works good mechanically buut the pedal feel is kinda sloppy. ive bled the hydro line several times and still no improvement in the pedal feeling. has anyone used this setup before? is that just how the pedal is gonna feel using the adapter? the clutch releases and engages fine but i have yet to drive it, its still on jackstands
#2
Honda-Tech Member
Re: Hasport clutch master adapter help
I got Innovative mounts B-Series Cable to Hydraulic Conversion kit...Is the Hasport different or same?...My pedal feel is great....
#3
Honda-Tech Member
Thread Starter
Re: Hasport clutch master adapter help
its pretty much the same setup just the cable sits at more of a 90 from the master and not straight across from it. does the radiator fit okl with the adapter mounted there? i have mine under the battery tray
#5
Honda-Tech Member
Thread Starter
Re: Hasport clutch master adapter help
i have a few of my lines but my comp has been crashing on me and im forced to use my ipod. after bleeding the line 3 more times today my pedal feel had a vast improvement. the pedal is firm and it engages smoothly. i had to unhook the cable and work the master by hand to get all the air outta the line. so far so good....im considering relocating the adapter tho. i really like having the cable down in front rather than across the engine bay
Thread
Thread Starter
Forum
Replies
Last Post
hondastudent1on1
Honda CRX / EF Civic (1988 - 1991)
37
01-28-2010 10:23 AM
silverskateEF9
Honda CRX / EF Civic (1988 - 1991)
7
02-21-2008 11:45 PM