Honda and Acura Appearance/Cosmetic Forums

EtherEG93 · 07-06-2008, 09:43 AM

Breif History

Name: Ethan
Car History: Bought this car in 2007, done alot of work to it since

Modifications i have done:

Interior-
-Passenger 91 si seat (Grey stitched)
-Buddy club racing bucket
-F1spec rails
-Sparco Harnesses
-fidanza dual bend stainless shifter
-Mugen black shift knob
-Rear black interior
-12” Mtx Sub
-Black ek Armrest
-Crx si door panels
-Battery Relocation Battery box
-Broadway Mirror 240mm flat
-Prelude steering wheel, 91 si

Engine
-D15b2 (converted to mpfi)
-eBay stainless header 4-2-1
-Blox Velocity stack intake, eBay piping
-Ngk plug wires
-Fluidyne radiator
-Si transmission, Installed jan 11 2008

Suspension
Spring/summer...
-Function form full coil overs
-eBay rear upper strut bar
-Nuespeed Front upper strut bar
-4pntRollbar welded in, painted red
-Stock struts with ebay coils (winter suspension)
-Blox rear Lcas

Exterior
-96-00 invidia cat,
-Crx invidia N1 exhaust
-11 pound konig heliums
-New tires, nitto neogen
-Eg Side markers
-Carbon fiber oem hood
-Xenon super white (brights)
-12k purple hids (lows)
-Front and rear Ef mudflaps

Future Mods
-Rear welded strut bar
-Rear disc conversion
-omni lcas
-rear sway bar ST
-slim fan
-paint roll bar bronze or white
-paint valve cover black metallic

When i first bought the car

Nasty blue interior

Cleaned the engine bay a little

Was missing side markers

Traded my oem hood for a carbon hood plus 100$
Then got Eg side markers installed
Installed a crx front lip

Got 90 91 crx si seats and recovered them with red stitched, embedded CRX
Painted the cage red? why i don't know

Neuspeed front strut bar
Fluidyne radiator

This ad is not displayed to registered or logged-in members.
Register your free account today and become a member on Honda-Tech!

EtherEG93 · 07-06-2008, 09:47 AM

Before winter (November)

Winter shots
Date is... Jan 20th

Shot out on my street before i do the parking lights and brakes, my rotors were warped bad

The new Drivers seat, Buddy club

suspension Function Form type 1

marker lights being redone

I know si rear brakes coming summer time, but these were shot, aahhah

Thought this looked cool...

Had to run back out to the store... Brakes weren't as easy as planned....

Got the brakes done, Worked very well, now i need to adjust my e brake tomorrow

no more battery!, still needs to be cleaned more, not sure if i wanna wire tuck this
Intake is coming soon, might wait till my mpfi a6 build is done though

Remember those ugly markers?
Well I'm going to do about 6 more coats, (darker) Pics coming tomorrow

Cant wait to get my bucket in! ordering a bracket for it soon
(Yes new clear coat for the hood come spring)

Relocated battery and sub attached to rear strut bar

EtherEG93 · 07-06-2008, 09:51 AM

Hope everyone loves pictures...

Got the corners done

Cool shot

Much better

Close up shot, look real good, almost match the corner lenses i have,
*thats what i was going for

Harness is here!

strapped in!

New filter coming...

Blox Velocity stack, and 6 inch filter, HUGE

Also ordered hyper white bulbs

EtherEG93 · 07-06-2008, 09:53 AM

New headlights, Very white, i like them cant beat 11.99 to my door
-don't mind the lip, i was having fun in the snow and pulled a screw out

My new intake

my new header, 50$ to my door

heres some new goodies!

Custom brackets, sides are from gerry mulligan! Great guy

snell m 2005 helmet, 95 to my door! ebay!

A set of wires for my d15b2, which can be used for the a6 when thats done

EtherEG93 · 07-06-2008, 09:55 AM

Newest updates

Smoke Plate cover

Black mugen shift knob

Blox lcas

sundown

with winter wheels, and function forms on

Motor shots, showing plugs, and header (newest items)

my seat and new crx si pass seat

My favorite, i love this black knob, not ricey, just right

Also got a motor stand for my engine!

EtherEG93 · 07-06-2008, 09:57 AM

Gforce 50 mm eye bolts!
Now i can mount my harness in my car

Most recent..

threw on my rear tow hook

License plate smoked cover is the newest update

G-force bolts in, and harnesses in, work great

spoon mirrors

I like them alot

Most recent engine bay shot,
New plugs, wires, dizzy cap, rotor, fuel filter, and o2 sensor

EtherEG93 · 07-06-2008, 09:59 AM

New wheels, Konig heliums 10.8 pounds
Nitto Neogen tires 205/50/15

Bought new Fenders, going to get them painted, then sidemarkers cut in the right spot

Ordered 12k hids for my lows

Mpfi Swap is finished!

Heres some autox pics when i was still dpfi june 22nd

next time my time should drop alot! with mpfi installed!

Also shows my new fenders and the sidemarkers in the right spot!

BLU CIVIC · 07-07-2008, 01:44 PM

looks good

sir90hatch · 07-07-2008, 06:08 PM

Keep it going, not a bad build

.Grimace · 07-07-2008, 06:43 PM

Quote:

Originally Posted by sir90hatch

Keep it going, not a bad build

lpfan8278 · 07-08-2008, 07:57 AM

looking good Ethan

EtherEG93 · 07-08-2008, 10:01 AM

Thanks guys im about to paint my valve cover soon, and ill take new pictures soon,

of the mpfi and hids, and cover when im done with it

EtherEG93 · 07-08-2008, 04:02 PM

Heres my valve Cover i did, shaved...

Stripping it down..

painted Metal flake black
with bronze washers
Will install tomorrow when it fully cures

lady ceri_us · 07-15-2008, 07:02 PM

Nice work!!!!

keep it up....

B16B_coupe · 07-15-2008, 07:17 PM

looks good! we need to go out on a shoot sometime soon! This weekend?

lpfan8278 · 07-18-2008, 08:52 AM

car looked real clean buddy i love it

Real Ek4 · 07-29-2008, 12:16 PM

Quote:

Originally Posted by lady ceri_us

Nice work!!!!

keep it up....

+1....

But you don't need a B or K series??

Sleeperzzz95 · 07-29-2008, 04:32 PM

Nice... I like where your going with this build

Spoon Sports · 07-29-2008, 11:33 PM

[quote=EtherEG93]

What kind of rims are those?

EtherEG93 · 09-17-2008, 08:05 PM

those were special edition wheels,

and if everything goes right it will have a b,h,k in it oneday

probably a b20 at this point

pandarex · 09-17-2008, 08:43 PM

looks good

twinksack · 09-17-2008, 08:46 PM

with all that power you defiantly need a roll cage

Smokinsax · 09-18-2008, 12:23 PM

Quote:

Originally Posted by twinksack

with all that power you defiantly need a roll cage

dick...

car looks way fun to drive.

twinksack · 09-18-2008, 01:46 PM

Quote:

Originally Posted by Smokinsax

dick...

car looks way fun to drive.

thats what i give yo mama

EtherEG93 · 10-06-2008, 06:03 PM

ha, yeah its slow.

i need to get a motor.

might be a b20 at this point

should be getting gsr and rear disc this weekend for it. i really need to keep this updated but i got another Eg, its got a thread on clubeg6.com

i started sanding the hood down to have it recleared

ill work on this soon

07-06-2008, 09:47 AM	#2
EtherEG93 Junior Member My Garage Join Date: Aug 2005 Location: Cincinnati, oh, usa Posts: 247	Re: Etheregs 91 Dx Crx Build (EtherEG93) Before winter (November) Winter shots Date is... Jan 20th Shot out on my street before i do the parking lights and brakes, my rotors were warped bad The new Drivers seat, Buddy club suspension Function Form type 1 marker lights being redone I know si rear brakes coming summer time, but these were shot, aahhah Thought this looked cool... Had to run back out to the store... Brakes weren't as easy as planned.... Got the brakes done, Worked very well, now i need to adjust my e brake tomorrow no more battery!, still needs to be cleaned more, not sure if i wanna wire tuck this Intake is coming soon, might wait till my mpfi a6 build is done though Remember those ugly markers? Well I'm going to do about 6 more coats, (darker) Pics coming tomorrow Cant wait to get my bucket in! ordering a bracket for it soon (Yes new clear coat for the hood come spring) Relocated battery and sub attached to rear strut bar __________________ Current Rides- 91 Dx Crx (Build Thread) http://www.honda-tech.com/zerothread/2337585 93 Dx Hatch

07-06-2008, 09:51 AM	#3
EtherEG93 Junior Member My Garage Join Date: Aug 2005 Location: Cincinnati, oh, usa Posts: 247	Re: Etheregs 91 Dx Crx Build (EtherEG93) Hope everyone loves pictures... Got the corners done Cool shot Much better Close up shot, look real good, almost match the corner lenses i have, *thats what i was going for Harness is here! strapped in! New filter coming... Blox Velocity stack, and 6 inch filter, HUGE Also ordered hyper white bulbs __________________ Current Rides- 91 Dx Crx (Build Thread) http://www.honda-tech.com/zerothread/2337585 93 Dx Hatch

07-06-2008, 09:53 AM	#4
EtherEG93 Junior Member My Garage Join Date: Aug 2005 Location: Cincinnati, oh, usa Posts: 247	New headlights, Very white, i like them cant beat 11.99 to my door -don't mind the lip, i was having fun in the snow and pulled a screw out My new intake my new header, 50$ to my door heres some new goodies! Custom brackets, sides are from gerry mulligan! Great guy snell m 2005 helmet, 95 to my door! ebay! A set of wires for my d15b2, which can be used for the a6 when thats done __________________ Current Rides- 91 Dx Crx (Build Thread) http://www.honda-tech.com/zerothread/2337585 93 Dx Hatch

07-06-2008, 09:55 AM	#5
EtherEG93 Junior Member My Garage Join Date: Aug 2005 Location: Cincinnati, oh, usa Posts: 247	Re: Etheregs 91 Dx Crx Build (EtherEG93) Newest updates Smoke Plate cover Black mugen shift knob Blox lcas sundown with winter wheels, and function forms on Motor shots, showing plugs, and header (newest items) my seat and new crx si pass seat My favorite, i love this black knob, not ricey, just right Also got a motor stand for my engine! __________________ Current Rides- 91 Dx Crx (Build Thread) http://www.honda-tech.com/zerothread/2337585 93 Dx Hatch

07-06-2008, 09:57 AM	#6
EtherEG93 Junior Member My Garage Join Date: Aug 2005 Location: Cincinnati, oh, usa Posts: 247	Re: Etheregs 91 Dx Crx Build (EtherEG93) Gforce 50 mm eye bolts! Now i can mount my harness in my car Most recent.. threw on my rear tow hook License plate smoked cover is the newest update G-force bolts in, and harnesses in, work great spoon mirrors I like them alot Most recent engine bay shot, New plugs, wires, dizzy cap, rotor, fuel filter, and o2 sensor __________________ Current Rides- 91 Dx Crx (Build Thread) http://www.honda-tech.com/zerothread/2337585 93 Dx Hatch

07-06-2008, 09:59 AM	#7
EtherEG93 Junior Member My Garage Join Date: Aug 2005 Location: Cincinnati, oh, usa Posts: 247	Re: Etheregs 91 Dx Crx Build (EtherEG93) New wheels, Konig heliums 10.8 pounds Nitto Neogen tires 205/50/15 Bought new Fenders, going to get them painted, then sidemarkers cut in the right spot Ordered 12k hids for my lows Mpfi Swap is finished! Heres some autox pics when i was still dpfi june 22nd next time my time should drop alot! with mpfi installed! Also shows my new fenders and the sidemarkers in the right spot! __________________ Current Rides- 91 Dx Crx (Build Thread) http://www.honda-tech.com/zerothread/2337585 93 Dx Hatch

07-07-2008, 01:44 PM	#8
BLU CIVIC Junior Member My Garage Join Date: Jul 2005 Location: Durham, NC, USA Posts: 845	Re: Etheregs 91 Dx Crx Build (EtherEG93) looks good __________________ Honda/Acura For Sale thread Here

07-07-2008, 06:08 PM	#9
sir90hatch Junior Member My Garage Join Date: Sep 2005 Location: Panhandle, Florida, USA Posts: 473	Re: Etheregs 91 Dx Crx Build (BLU CIVIC) Keep it going, not a bad build __________________ GOT JDM ? Mugen $$ Prowler

07-08-2008, 07:57 AM	#11
lpfan8278 Junior Member My Garage Join Date: Sep 2007 Location: Cincy, Oh Posts: 233	Re: Etheregs 91 Dx Crx Build (.Grimace) looking good Ethan

07-08-2008, 10:01 AM	#12
EtherEG93 Junior Member My Garage Join Date: Aug 2005 Location: Cincinnati, oh, usa Posts: 247	Thanks guys im about to paint my valve cover soon, and ill take new pictures soon, of the mpfi and hids, and cover when im done with it __________________ Current Rides- 91 Dx Crx (Build Thread) http://www.honda-tech.com/zerothread/2337585 93 Dx Hatch

07-08-2008, 04:02 PM	#13
EtherEG93 Junior Member My Garage Join Date: Aug 2005 Location: Cincinnati, oh, usa Posts: 247	Heres my valve Cover i did, shaved... Stripping it down.. painted Metal flake black with bronze washers Will install tomorrow when it fully cures __________________ Current Rides- 91 Dx Crx (Build Thread) http://www.honda-tech.com/zerothread/2337585 93 Dx Hatch

07-15-2008, 07:02 PM	#14
lady ceri_us Junior Member My Garage Join Date: Apr 2008 Location: 760, CA Posts: 435	Nice work!!!! keep it up.... __________________ *Lady Ceri_Us & Ceri_Us http://is.rely.net/1-92-56342-l-HDIv...QjldAGcqmQ.gif* (I <U>lOve</U> You* Baby!) The Ultimate Tint & Wheel Shop* http://images.honda-tech.com/set1/smile/emwink.gif http://images.honda-tech.com/set1/smile/emthup.gif http://theutwshop.com/

07-15-2008, 07:17 PM	#15
B16B_coupe Senior Member My Garage Join Date: Nov 2005 Location: FAR EAST COAST, Norcal, usa Posts: 12,113	Re: (lady ceri_us) looks good! we need to go out on a shoot sometime soon! This weekend? __________________ wēk´sôs ĭn'dəstrēz----MugenəəPower Function>Form flickr Dont shop at zerolift in cini OHIO

07-18-2008, 08:52 AM	#16
lpfan8278 Junior Member My Garage Join Date: Sep 2007 Location: Cincy, Oh Posts: 233	Re: (B16B_coupe) car looked real clean buddy i love it

07-29-2008, 04:32 PM	#18
Sleeperzzz95 Junior Member My Garage Join Date: Jul 2008 Location: Laurel, DE, US Posts: 277	Re: (Real Ek4) Nice... I like where your going with this build __________________ Vouches: 1QwIkEf, slambedcivic, ZCBlackEG, boostedeg302, alexg103

07-29-2008, 11:33 PM	#19
Spoon Sports Member My Garage Join Date: Aug 2006 Posts: 1,427	Re: Etheregs 91 Dx Crx Build (EtherEG93) [quote=EtherEG93] What kind of rims are those? __________________ <U>Calvin and Hobbes</U> - "Greatest comic I ever read!" Powered By: <U>HybridWerks</U> Sleeper Rex '88 89 Civic Si - Daily driver Spoon Sports EF parts For Sale Thread http://www.hondamarketplace.co...23972

09-17-2008, 08:05 PM	#20
EtherEG93 Junior Member My Garage Join Date: Aug 2005 Location: Cincinnati, oh, usa Posts: 247	those were special edition wheels, and if everything goes right it will have a b,h,k in it oneday probably a b20 at this point __________________ Current Rides- 91 Dx Crx (Build Thread) http://www.honda-tech.com/zerothread/2337585 93 Dx Hatch

09-17-2008, 08:43 PM	#21
pandarex Member My Garage Join Date: Oct 2004 Location: Big Bear, So Cal, USA Posts: 2,343	Re: (EtherEG93) looks good __________________ WTB: Good condition USDM B16 or B18C1, C5

09-17-2008, 08:46 PM	#22
twinksack * B A N N E D * My Garage Join Date: Aug 2008 Location: corona, ca, usa Posts: 212	Re: (pandarex) with all that power you defiantly need a roll cage

10-06-2008, 06:03 PM	#25
EtherEG93 Junior Member My Garage Join Date: Aug 2005 Location: Cincinnati, oh, usa Posts: 247	ha, yeah its slow. i need to get a motor. might be a b20 at this point should be getting gsr and rear disc this weekend for it. i really need to keep this updated but i got another Eg, its got a thread on clubeg6.com i started sanding the hood down to have it recleared ill work on this soon __________________ Current Rides- 91 Dx Crx (Build Thread) http://www.honda-tech.com/zerothread/2337585 93 Dx Hatch

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search