FAST-TURBO ALUMINUM INTERCOOLER PIPING FROM $ 18 SHIPPED

[Flamenco-T]

Fast-Turbo aluminum intercooler piping - Comes in 45 degree, 90 degree and 2 ft of straight piece. - Polished and non coated, ready to weld. - Very light and sturdy and available in 2.25", 2.50" and 3.00" Prices for bends is $ 18 shipped, straight piece is $ 24 shipped FREE SHIPPING ! <FONT COLOR="GREEN">HOW TO ORDER </FONT> To pay via : Please fill in the quantity, copy the worksheet below and paste it to your paypal payment paypal@fast-turbo.com Aluminum IC piping. 2.25" Straight - ____ x $ 24 = 2.25" 45 Degree bend - ____ x $ 18 = 2.25" 90 Degree bend - ____ x $ 18 = 2.50" Straight - ____ x $ 24 = 2.50" 45 Degree bend - ____ x $ 18 = 2.50 90 Degree bend - ____ x $ 18 = 3.00" Straight - ____ x $ 24 = 3.00" 45 Degree bend - ____ x $ 18 = 3.00" 90 Degree bend - ____ x $ 18 = Phone: (817) 439-3748 Email: sales@fast-turbo.com Check or Money Order: Fast-Turbo.com 1150 Blue Mound Rd West Suite 810 Haslet, TX 76052 ***Suggestion*** To do a complete intercooler piping on a honda with front mount IC, you'll need: 7 - 90 degree bends 2 - 45 degree bends 1 - straight piece. Of course every application is different, this is based on a standard manifold and front mount intercooler. Call me and I can get you all the bends that you need to do your individual setup. Thanks guys, Stan Modified by Flamenco-T at 10:26 AM 7/3/2007

This ad is not displayed to registered or logged-in members. Register your free account today and become a member on Honda-Tech!

[97_hatch]

Suscribed.. Nice deals..

So are these weld-able then? And how of which pipes you think I'd need for a 97 civic?

[Flamenco-T]

They are weldable...no coating on them, just polished finish. No need to grind them off, just weld it staright up.

What kind of manifold are you running ?

[97_hatch]

I'd be running a ram.

[Flamenco-T]

with 7 - 90 degrees, 2 - 45 degree and 1 straigth you should have everything that you need.

In the event that you're left iwth too many bends, I will take them back for credit or refunds..as long as you make prior arrangement with me when you make the order.

stan

[JST1CAM]

What would i need for a 92 civic hatch with a d-series, running the VX manifold, and a 14b??

also do you have oil line kits?

[w8lifter21]

I'd like to know too about oil lines!

[Flamenco-T]

New oil line kit specials..

http://www.honda-tech.com/zerothread?id=1902396

[wrEcKed_LX]

This may be a stupid question but what would you suggest for a 98 d16y7. I have looked all over but havent found an actual "kit" so I figured making my own would be better.

[Flamenco-T]

If you get about 7- 90 degrees, 2- 45 degrees and 1 straight, you will be fine and if for some reason yuo have some that are unused, you can send it back to me and I'll give you full credit with no restocking fee whatsoever.

I'd rather you have too many than not enough..


stan

[Flamenco-T]

bumpitty

[Flamenco-T]

hot cakes hot cakes..

stan

[Rabid Machina]

ill put my order in, in a couple of days

[allstokhonda]

Bump for stan!.. Thanks for the piping!!


-Chad-

[hybrid_KJ]

I used these for my piping. Welded up great, nice finish.

[allstokhonda]

Got my piping today. It all looks great.. Just gotta weld it up! Thanks again stan.

-Chad-

[Muckman]

How long is the straight peice?
Would 2.75" be an option?

[Flamenco-T]

Brian,

Straight piece is 2 feet long, unfortunately they don't have 2.75

I have been trying to get them made, but there's not a whole lot of demand to start prodcution

[92SIeg]

for a good price

[Laserjock]

any U's in 2.5" ?

[Flamenco-T]

Originally Posted by Laserjock

any U's in 2.5" ?

Sorry, No U's...the problem with U bend is that you can never find any with the right radius for your car, if you do find them expect to pay about $ 50-$ 60 per U-bend.

With two 90 degree bends you'll have a better fitment U imo.

stan

[dc2turbo]

Pm'd

[I.C.C.]

hope to be ordering mine in the next couple weeks

[ke98248]

Originally Posted by Flamenco-T

Brian,

Straight piece is 2 feet long, unfortunately they don't have 2.75

I have been trying to get them made, but there's not a whole lot of demand to start prodcution

I need them in 2.75" TOO!

[Importracer_001]

PM'ed