 |
|
|
|||||||
| Register | FAQ | Members List | Calendar | Search | Today's Posts | Mark Forums Read | My Recent Topics | My Notes | Garage | Dealer Listings |
|
|
 |
|
|
Thread Tools | Search this Thread |
10-15-2004, 10:19 AM
|
#1 | |||||
|
New User
My Garage
Join Date: Feb 2000
Posts: 7,804
|
***Forced Induction Forum FAQ***
__________________
Nick - Integra & Forced Induction Moderator <FONT SIZE="4">Are you a DC Sports fan? This is your off-season kool-aid!</FONT> Last edited by HybridcivicLS-T; 05-03-2009 at 10:19 PM. Reason: needed it |
|||||
|
|
|
04-19-2005, 12:55 PM
|
#6 |
|
Member
My Garage
Join Date: Sep 2001
Location: Rochester, NY
Posts: 6,975
  |
Re: ***Forced Induction Forum FAQ***
Overheating
This is for all the threads I see each day about overheating! If your car is over heating the #1 cause is air in the system. If you have recently drained and refilled the system then this is almost certainly the answer. Some cars have bleeder valves located near the upper coolant line going into the head. Fill the radiator until coolant starts to pour out of the open bleeder then tighten it up. Cars without this bleeder valve can pull the radiator cap off and warm the car up until coolant reaches the very top of the radiator neck. In either case I le to re bleed the system again after a few miles to make sure the entire system is fully circulated. Some tips include leaving the cabin heater on full to allow full coolant circulation and filling the overfill bottle to its "max" level in-case the system needs to draw in more coolant. http://www.honda-tech.com/zerothread?id=140774 Other common causes are a bad thermostat, radiator fan isn't kicking on or is inadequate. And in the most extreme case, a bad head gasket will cause overheating as super hot combustion chamber gases are super heating the coolant.
__________________
425whp/300ft-lbs at 17psi |
|
|
|
|
05-30-2005, 04:54 PM
|
#7 |
|
Junior Member
My Garage
Join Date: Nov 2003
Location: TINA U FAT LARD...COME GET UR DINNER, FL, USA
Posts: 947
|
Re: ***Forced Induction Forum FAQ*** (Rory Breaker)
nice write up man...this is gonna be realllly handy
__________________
WE RUN TINGZ....TINGZ NUH RUN WE JBB/RUTHLESS http://www.ruthlesscc.com AIM: gen2integra2001 vouch:<U></U> http://images.honda-tech.com/set1/smile/emthup.gif KrazyMC, jdmeghatch94, jdmcoupe88, Zanka,FULLY EQU1PPED, JDMstance99, Davep, amls4dr200whp DA Squad # 205 http://images.honda-tech.com/set1/smile/emthup.gif |
|
|
|
|
06-17-2005, 09:42 PM
|
#8 | |
|
Member
My Garage
Join Date: Aug 2002
Location: ashEVILle, NC, USSR
Posts: 4,354
|
Re: ***Forced Induction Forum FAQ*** (flip1199)
Quote:
__________________
There is no mechanical problem so difficult that it can not be overcome by brute strength and ignorance. |
|
|
|
|
|
01-17-2006, 01:03 AM
|
#9 |
|
Junior Member
My Garage
Join Date: Jun 2004
Location: Bay AreA, cali
Posts: 612
|
Re: ***Forced Induction Forum FAQ*** (J. Davis)
__________________
78 corolla dlx - towed 95 civic coupe - Sold 95 civic coupe - Crashed |
|
|
|
|
05-07-2006, 05:50 AM
|
#10 | |
|
Member
My Garage
Join Date: Oct 2004
Location: RIP Duke of Turbo, CA
Posts: 1,829
|
Re: ***Forced Induction Forum FAQ*** (Bense)
Here is a pretty cool writeup explaining turbocharging, supercharging and basic engine operation. Puts things in laymans terms with nice illustrations as well and a brief history of the turbocharger.
http://www.turbocompressori.ne...s.htm
__________________
Quote:
doublej http://images.honda-tech.com/set1/smile/emsmile.gif RIP Earl |
|
|
|
|
|
05-21-2006, 10:58 AM
|
#11 |
My Garage
Join Date: May 2006
Location: san diego, ca, us
Posts: 265
|
Re: ***Forced Induction Forum FAQ*** (Rory Breaker)
|
|
|
|
|
08-16-2006, 12:27 AM
|
#12 |
My Garage
Join Date: Aug 2006
Location: asdfasdsfad, asffasd, china
Posts: 26
|
Re: ***Forced Induction Forum FAQ*** (alphaek)
Great threads!
|
|
|
|
|
08-18-2006, 05:30 PM
|
#13 |
|
Junior Member
My Garage
Join Date: Mar 2004
Location: vt, usa
Posts: 194
|
Re: ***Forced Induction Forum FAQ*** (exim@uu.pp121.net)
|
|
|
|
|
08-29-2006, 03:02 PM
|
#14 |
|
Junior Member
My Garage
Join Date: Nov 2005
Location: Its Maine
Posts: 698
|
How Turbo's work:
http://www.turbonation.com/turbo.htm
__________________
91' CRX SI - SOLD, 97' ITR swapped coupe - SOLD, 94' Del Sol vtec swapped n/a build - SOLD |
|
|
|
|
11-06-2006, 11:53 AM
|
#15 |
|
Junior Member
My Garage
Join Date: Nov 2006
Location: Fort Myers, FL
Posts: 540
|
***Forced Induction Forum FAQ***
Delete this if you must but wow! This thread Helped me out so much I cant think of anymore questions to ask! I am so happy now
__________________
97 Civic DX New Daily CRX: Soon to be Built DOCH ZC Track car |
|
|
|
|
11-07-2006, 09:11 PM
|
#16 |
|
Member
My Garage
Join Date: Jul 2005
Location: EAST TEXAS
Posts: 4,151
|
Datalogging
I found this helpful with trying to datalog and since I haven't found a more solid source.
http://www.honda-tech.com/zerothread?id=1454695 Also, but I am sure mentioned elsewhere http://www.xenocron.com http://www.moates.net
__________________
My Build FS: honda Service Manuals and ETM Leaving the game for a bit! I will return stronger!! |
|
|
|
|
11-18-2006, 07:46 PM
|
#17 |
|
Junior Member
My Garage
Join Date: Jul 2006
Location: lester, AL, USA
Posts: 419
|
Re: ***Forced Induction Forum FAQ*** (next21)
what about nitrous?
__________________
D-series parts for sale http://www.hondamarketplace.co...42653 Camp1320 http://images.honda-tech.com/set1/smile/emthup.gif Moates.net http://images.honda-tech.com/set1/smile/emthup.gif vouches in Bio. http://www.honda-tech.com/zero...91895 |
|
|
|
|
12-29-2006, 08:27 AM
|
#18 |
|
Junior Member
My Garage
Join Date: Dec 2006
Location: USA
Posts: 102
|
Re: ***Forced Induction Forum FAQ*** (zzcoupezz)
This is a nice link
http://forcedinductions.com/help.htm http://forcedinductions.com/helpadvanced.htm |
|
|
|
|
09-27-2007, 06:09 PM
|
#19 |
|
Member
My Garage
Join Date: Oct 2006
Location: SoCal, CA, Cailfornia
Posts: 1,327
|
bump
|
|
|
|
|
11-23-2007, 04:45 PM
|
#20 |
|
Junior Member
My Garage
Join Date: Mar 2007
Location: kailua kona, hi, usa
Posts: 126
|
THANKS EVERY BODY WHO PARTICIPATING IN THIS FORUM IT HAS HELP ME ALOT!!
|
|
|
|
|
12-10-2007, 11:07 AM
|
#21 |
|
Junior Member
My Garage
Join Date: Sep 2007
Location: middletown, ohio, USA
Posts: 213
|
the first link under "What is in a turbo kit, what do I need?" is dead.
|
|
|
|
|
12-25-2007, 02:33 PM
|
#22 |
|
Junior Member
My Garage
Join Date: Apr 2007
Posts: 142
|
Re: ***Forced Induction Forum FAQ*** (TeStUdO)
great info guys
__________________
matthew11:28-29 Then Jesus said, “Come to me, all of you who are weary and carry heavy burdens, and I will give you rest. 29 Take my yoke upon you. Let me teach you, because I am humble and gentle at heart, and you will find rest for your souls. |
|
|
|
|
03-27-2008, 12:51 PM
|
#23 |
|
Member
My Garage
Join Date: Dec 2004
Location: Las Vegas, NV
Posts: 2,894
|
Re: ***Forced Induction Forum FAQ*** (hondapimpin420)
|
|
|
|
|
04-27-2008, 11:35 AM
|
#24 |
|
Junior Member
My Garage
Join Date: May 2007
Location: Close to Binghamton NY
Posts: 343
|
Re: ***Forced Induction Forum FAQ*** (Rory Breaker)
Good to know info
__________________
EJ1OWNERSCLUB Member #2191 I ♥ my Honda. |
|
|
|
|
05-26-2008, 07:11 PM
|
#25 |
|
Member
My Garage
Join Date: Apr 2007
Location: Jacksonville, Fl
Posts: 2,872
|
Re: ***Forced Induction Forum FAQ*** (LSej1)
http://www.automotivearticles....shtml-Turbo Selection
http://www.turbochargedpower.c...s.htm-Turbo terms |
|
|
|
|
| Bookmarks |
| Tags |
| afc, avcr, boost, creep, explained, feed, fittings, h22, hack, holset, honda, install, kit, line, manifold, obx, oil, safeguard, turbo |
| Thread Tools | Search this Thread |
|
|
-'95 Prelude - 13.7 @ 102
