CRX Toad

This is thread will be updated as close to quarterly as possible, so if your post is deleted out of here don't get upset at the quarterly cleaning. Keep this thread clean which means NO Post Whoring or Flaming. If this cannot be followed infractions maybe given.

Also only one post allowed...if you sell or need to add edit your post. We don't need the same person in here with multiple post. Keep all your FS/WTB in one post

ascarberry

wtb manual passenger mirror.

SI, meshies or fatfives.

LoSt is BlaCk

Brand New in the Box Skunk2 Pro S (version 1's) full coilovers, for 88-91 Civic, CRX, Wagon, Sedan..

http://www.hondamarketplace.com/show...+pro+coilovers

AlfieRoach

DA Rear disc swap trade or sell trade for anything towards a z6 swap in a ef, or 89 civic si stuff, also a d16a6 longblock no tranny only long block with IM head block and ecu trade or sell also

crx_si-r

Fs:

ITR Front brake calipers with brackets (accord wagon).....$150
Jdm RHD power window switches black with brackets.....$100
^^^with plug n play harness add $65

JDM CRX EF8 rear fog light switch.......$65
^^^with harness add $55

GSR cluster 70k......$65






WTB:
EF8 rear seats
J's Racing polyurethane lip for ef8 front end
Electric adjusting headlight motors with switch

Sancho815

hf parts fs:

Intake+ throttle body - 75
Trans- 100
Head- 75
wire harness - 50

gnxpro24

iTrader: (1)

parted out a 91 LX Sedan. Also parting out 94 Teg. Need money. let me know if you need anything. All prices obo

front lower control arms-40


sedan corner lights-25


tail lights


fuse box- $10 shipped


power steering rack-100

headlights-50

headlight bezels- 20

spare donut-25

full set of locks excluding one by trunk lever(back seat, trunk, 4 doors, and ignition) with oem Civic key- 65

front seats- 75

91 front bumper support- ?

auto trans with 96,000 miles- make offer

auto pedals- 15


auto ecu- make offer


tilt steering column- 30

center console- 15

5 speed lx transmission- sold

Intake and dpfi- offer

All other D15b2 parts

90-91 a pillar trim- 15

D15b2 head- offer

D15b2 blocks- offer

D15b2 intake manifold- 50

complete D15b2 engine, needs rebuilt- offer

D15b2 axles- 60


2 D15b2 dizzys


1 si/ex dizzy

1 obd dizzy looks brand new


94-01 Integra intermediate shaft


91 Sedan mudflaps- sold

D15B2 MOTOR MOUNTS AUTO AND MANUAL - $10 EACH OR $35 FOR AUTO OR MANUAL PAIR, $40 if u want the transmission bracket as well. more than pictured


D15b2 compltete engine for partout or rebuild


D15b2 starter

2 Used lx 5 speed clutch and pressure plate- still have on set left


90-93 Teg stabilizer bar


90-91 civic std hatch dash wiring harness


89 civic sedan lx engine harness


91 gauges. needs new speedometer/odometer portion- $20

BiG ChOr!Zo

iTrader: (1)

^is that $10 shipped for that front d15b2 driverside mount...!!!

ED9man

Just like the title says, never installed brand new in box. Part #8041 1166SP4 (front) and 8041 1153SPORT (rear). If you have an 88 with the stamped steel style LCAs I have a pair of 89-91 style LCAs I will sell for an additional $40 so they can be installed on your car. $550 shipped.

boostedb16a3

B series into 88-91 crx/civic intercooler piping, charge pipe with hks ssq style bov and intercooler. $200 but I can flex a tad but not too much. Just hit me up and we can take it from there. 386.216.5422

-Joe



Uploaded with ImageShack.us

SoCalEF'in

88-91 civic hatch optional rear speaker pods with oem HONDA grills-160

89 civic Si hatch rear seats-100 OBO

89-91 civic hatch sun roof complete uncut harness with relay and switch-$50

RARE!!!Civic si optional Fog lights complete with all brackets and hardware(NO cracks or chips in glass)-250 OBO
***NOTE these are NOT prelude*****

89 Civic Si Cluster-$50 OBO

JDM EF8/EF9 OEM Radiator with **** Cap- $60

88-89 civic optional lower console-Blue - SOLD

local pick up prefered. 818 4seven0-1zero4zero

efjones9

i have all of these parts clogging up my shed floor space. with that said everything is cheap.everything in working order. pickup in duarte ca
contact 626 679 2183 text preferred

pics--->stuff for sale pictures by tjones_gsx - Photobucket

ill trade anything here for a air fuel ratio gauge. and im looking for a apexi vafc/safc

1. D series 92-95 vss modified to work with cable trans or 96+ trans..30+ shipping

2.dohc zc idle control valve (working of course)...$10+ shipping

3.ed(88-91) ac fan..10+shipping

4.non vtec valve cover 10+shipping

5.(CT.2) ed (88-91civic ) water tube $5+ shipping

6.Crx driver side mirror good condision 10+ shipping

7.d series 1.6 oem cam gear...$5 +shipping

8.dpfi MT distributor...$old

9. 90 si hatc sterring wheel (a lil damage on top of wheel) 15+ shipping

10.obd2 injector clips 10+ shipping

11.d series oem oil catch $5+ shipping

12.d series 4-1 oem header.. top portion. 10+shipping

13.obd0 mpfi distributor plug 10+ shipping

14.obd1 injectors. missing gaskets $10+ shipping

15.obd0 pm5 MT ecu $10+shipping

16. speedo cable $5

17. Gmx-1040 class A pioneer 800 watt (i think) amp purple $60

FakeJDMEF8

Alright, so ive sold a bunch of stuff on here, locally, and to friends. However, i still have a lot to get rid of if im going to be able to move into my new place. Im not in any real hurry to sell any of this. I've been selling parts consistantly. Im up for trades, but only for the trades as listed below. If you're local, you luck out more. Picking up saves you anywhere from $5-20 off the shipped price below

THING'S I'LL TRADE FOR:



12" fan shroud
PSWDjdm or similar rear strut tower bar for EF
EDM rear 16v wing for a CRX
true cable to hydro conversion for EF
RT4wd rear differential subframe
Stock oem wagon inner tails (on the hatch) must be in mint shape
front wagon passenger door molding (some lady hit me and need this piece)
Stock 88-91 CRX ashtray/radio bezel piece. Any color
blue 88-89 front civic wagon seatbelt latches
throttle cable from civic wagon in mint shape (crx/civic are different)
EF Antenna unit

CONTACT: five 0 five 45zero 7zero85 or email at maxwellduryea at gmail dot com or on here
Location: Albuquerque, NM



ENGINE:
Legit HMOTORS OBD0 EF8 CRX SiR B16a longblock

B16a HMOTORS swap with less than 70,000KM mileage. Complete swap into an EF minus a dizzy, injectors, a clutch and a flywheel. I do have both an OBD0 and OBD1 alternator to choose from, both of which are in great condition and just checked at Napa. I have included both sides to any necessary pigtail plugs so that wiring is that much easier. Both male/female ends are included. This way it can be done correctly and not all hacked like most swap are…This was bought legit and have matching receipts.

Swap includes the following:

Low mileage HMOTORS OBD0 EF8 CRX SiR B16a longblock with matching close ration J1 Transmission (id swap into a new case as one bolt is grinded down a bit from roadrash. It works fine, no leaks, but id just do it as a preventative maintanince procedure).
-Intake Manifold, throttle body, and fuel rail
-Choice of OBD1 or OBD0 Alternator; I don’t have any other choices, sorry.
- OBD0 PR3 ECU
-Place RACING steel motor mounts. All three mounts, steel block side mount, and OEM T-Bracket
-OEM Axles and SK7 half-shaft (one boot needs replacing, as there’s a tiny tear, and the replacement boot IS included)
-OEM CRX Si front brakes, rotors, and brakelines. If you have a Civic DX or Standard, you need this to complete the swap, as these models use a tiny spline and tiny knucke assembly.
-replica MUGEN valvecover, stripped and cam-cut
-both crank pulley and alternator pulley are UNORTHADOX racing
-spare pair of B16a cams (a pair with 20k on them were swapped out when headgasket and all was done. The pair inside now are MINT)
-OEM Honda Sumitomo plug wires

The following has been replaced in the last 10,000kms (10k) or has JUST been installed (0 miles)
-OEM Honda waterpump, timing belt, tensioner, and headgasket (10k)
- OEM Honda cam cap (10k)
- OEM Honda headbolts (10k)
- OEM Acura NSX VTEC solinoid (the USDM one doesn’t fit, it uses the 1991 NSX one) (10k)
- OEM Honda rear main seal (10k)
-OEm Honda woodruff key for crank (10k)
- OEM Honda Thermostat (10k) and gasket (0k)
- OEM Honda FPR O Ring (10k)
- NAPA Alternator belt (10k)
- OEM Honda valvecover gasket (0k)
- OEM Honda oilpan gasket (0k)
- OEM Honda Intake Manifld gasket (BNIP, not installed yet, 0k)
- OEM Honda Exhaust Manifold gasket (BNIP, not installed yet, 0k)

Also includes a huge pile of parts that go with the engine. Parts that were recently replaced, parts that complete the swap, and extras. Anything that is B16a that I find will be included. I no longer have a b16a, so no need to keep the extras around.

This motor has been in my CRX for a few years, but has seen little use as it was installed during college (my car got out maybe once a week in college. Mostly to a party in town or to see my parents in the mtns) so miles didn’t rack up. I had great plans to build the engine and do SCCA, but that never happened. Im not concidering the thought of going KSeries, and have decided to sell the swap to fund that endeavour.

Id really like to sell as a complete swap, and not sell it piece by piece. If it comes down to that, the longblock stays together, the trans by itself, and all mounts together, all axles/halfshaft together, etc. You get the point.

PENDINGGGG....$1,500 cash gets all listed above. Or ill take partial/complete trades for the following items. And nothing more. No I don’t want your Nordic Track or your XBOX….


Hasport Cable Mounts for B series in EF chassis, super clean, this is the cable to hydro kit.- $280 shipped

Nokya B Series spark plug cover...had bought for my Replica Mugen cover, but doesnt fit. does fit stock VC's perfectly, as illustrated in the picture. $25 shipped

D16Z6 head in great shape. pulled from a running car with under 100k on it. Ive been gong back and forth over doing a minime on my RT, but just dont have the time. I cleaned it up real nice, painted the cover, new VC gasket, etc. All sensors and VTEC solinoid included. Great shape. No need. $180 picked up (wont ship, unless you want to arrange it)

D16Y8 Intake Manifold. The manual one; not from an auto. great shape, cleaned up real nice. includes matching rail, throttle body, and new gasket. again, no mini me for me.. $100 shipped or $75 picked up

D16A6 oil pan. excellent shape. not tampered with, straight.Threads are mint. $50 shipped, $35 picked up


BRAKING/Suspension:

1997 JDM ITR Booster and Matching Master Cylinder. I had this in my CRX for the longest time, but I have since swapped to a booster delete and this needs a new home. For use in EF/ED’s, one brakeline must be bent to fit on the other side. Furthermore the line must be re-flred onto the provided 14mm hose fairing. (finding this fitting was an expedition in itself). For DC/EG, im unsure what needs to be done. Id assume that its a bolt in for DC teg’s as it is ITR….but im unsure. This is a NON-ABS unit…which is gerting rare to find these days…The master cylinder is 1” bore and the booster is significantly larger than the stock booster. The complete setup has been refinished, rebuilt and professionally painted The MC had been rebuilt last October and the booster was painted along with my car last August. I had also went the extra mile to replace the topcap and resavoir as the wire connections were corroded. It’s a really good unit, but I wont be needing it any longer. $175 shipped

15/16" MC, BNIP from Honda...nissin; from the Honda Civic EX 1991. Just purchased from Majestic, but have no use as i sold the car. BRAND NEW!! $110 Shipped

15/16" MC, great used shape, pulled off my running, operational CRX...$35

40/40 valve off a GSR Teg w/low miles, has been pressure checked and
cleaned, $35 shipped

Brand new pair of ARP Wheel Studs Set (20 studs) 12mm x 1.5, 5 of them
outta the packaging, never used $65 shipped

5mm Wheel spacers. not messing with spacers as the wheels i prefer
have the right offset (6 of them) all for $60 shipped

ONE 15x6.5 rota slipstream, 4x100 gunmetal with polished lip. in
pretty mint shape. mounted for a week while i sourced another full
polished one. in rota boxxxx- $75 shipped



INTERIOR:

RSX Type S Seats in titanium (tan) for sale. I had picked these up a few months ago, but have since decided to have cloth or suade front seats instead. These are mint shape. I got them in pretty good shape, and nursed them back to perfection with tons and tons of leather care and leather conditioning rub. They feel supple and comfy. As they are Type S seats, they have lumbar, height adjustment and side airbags that have not been deployed. These are great seats, but I just am not going to need them any longer.

RARE Acura DA Integra 1990-1993 Armrest for sale. It is black, in good shape, and complete. This is the armrest that clears automatic seatbelts on 90’s Integras, Accords and Civics.. It’s been refoamed, recovered with soft black tweed, and is fully functional. The lid plastics are perfect, the cubby plastic is mint, although the cubby inner has a few stress cracks but is still intact, an the outer plastic on the legs (drivers side) has a slight stress crack. Can barely tell, unless you look closely. These sell on eBay and other sites for upwards of $200 in mint shape, so $150 seems appropriate.

CRX custom floormats. black with grey lettering. great shape. $110 shipped

CRX custom power window setup from civic handles, and switches. Out of my 1990. looks much better than the JDM ones with it on the wrong side... $95 shipped

RT SL shift **** $15 shipped

1988-89 Civic RT4wd Wagon seatbelt set in great shape. I have switched to all blue in my car, and no longer need these. Complete front set, and rears, I only have the the drivers and passenger side belts, no latches, or center belt/latch. Cant seem to find them. If I do, they will be included $90 shipped (shipping is $20 alone…)

2000 Civic Si POCKET with OEM HONDA EQUILIZER...fits in OEM, and looks
great. New stereo has no pinnout for it, so its gotta go...pretty much
in mint shape! $35 shipped

Honda Civic/CRX EF Armrest. Black on black, profesionally rehupostered
recently, all parts in great shape. Pressure cracks on the underside
where the 4 screws hold the two parts together. Can only tell if you
pulll it apart. Not visible when installed...Furthermore, almost all
armrests have cracks here. Sellers just dont note it...Anyways, custom
carbon fiber rear ashtray, OEM bracket and grommets included, as well
as the OEM fabric for future reference if you want it uphostered
differently. Im getting out of the Honda scene as i just have too many
cars and they just sit. These last few bits are my prized pieces and
they need a good home. From my PERSONAL collection! $350 shipped

Rear RT4wd BUBBLE WINDOW Interior bars...trade the bars for a set of speaker
pods...these are completely MINTTT! $110 shipped

RT4wd door moldings in GREY. These line each door and cover the metal that surrounds each door on the interior. They are in great shape, complete and need a new home. Have switched to blue. $45 shipped for all 4

Stock Honda RT4wd WAGON s200 Radio Glows GREEN and in great shape.
Just got a deal on another s2000, so going to switch. All buttons
light up, and works perfect. includes a Tape to iPod adapter $50 shipped

2 sets of sunvisors from 1991 Civic RT4wd - $20/set shipped

A set of Civic EX Sunvisors with RSX Mirrors modified to fit. Look
great, but have switched to wink mirrors- $40 shipped

Rear view mirror (x2) $15 each shipped


EXTERIOR:

Civic VTi rear foglight set. In really great shape. The housings have ben professionally refinished and primered, and the lens have been re-cleared. Both left and right, two housings, two lens, two gaskets, two inner lamps/bulb housing, harness for each light, and all hardware. GREAT shape. $170 shipped

CRX SiR EF8 front spoiler lip from my JDM front clip. I had ordered a BRAND NEW one from passwordJDM with my clip, and it was installed for maybe 1k miles before getting a Chargespeed replica instead. Will work on 90-91 CRX’s too, with a bit of persuation. These are RARE, hard to find, and usually REALLY expensive…as most mint JDM CRX parts are…looking to get $130 shipped

Civic STD Centercaps. Beautiful. These shined up very well. No longer have any steelies...$25 shipped

RT4wd rear Wiper arm and wiper motor, works great, needs new paint – brand
new wiper included $25 shipped




my email is maxwellduryea@gmail.com

Cheers guys!


-m

BiG ChOr!Zo

iTrader: (1)

should lower the price a bit...these are selling complete for $456.96 shipped with lifetime warranty from www.ltbautosports.com ...!!!

civiccrx

http://cgi.ebay.com/ebaymotors/ws/eB...%3AMESELX%3AIT

SOHCwarrior

5520 MSD Street Fire CD Ignition and 8207 Blaster SS Coil, both new in the box -$160 shipped

DEI 2”x50” roll of header wrap NIB -$35 shipped

Brand NEW OEM Honda shift ****- $15 shipped

Brand NEW OEM Honda CRX rear speaker install kit- $20 shipped

Brand NEW OEM Honda Antenna block off plate/ gasket- $10 shipped

from a 90-91 Crx:

Rear wiper/ motor- offer
Si 7/8 master cylinder- $10
90-91 black seat belts- offer
Front forks- $30
Front t-bar (white)- $40

paypal only. pm for questions and shipping, serious buyers please, no lowballing.

blue91EF

WTB;
manual rack n pinion for a 91 ef hatch.
nice set of OEM rims
91 SI drivers seat

4SALE;
complete d15b2
manual tranny for the same motor.
RTA's with drum brakes
actually ive got a whole EF if you want anything let me know.
92 JDM integra with quite a few parts. almost no interior however. but a nice auto trans that ide almost give away

Aesthetic Gains

iTrader: (1)

WTB Manual steering rack for an '88 Sedan.
WTB a set of mudflaps for an 88 sedan also.
WTB ITR hydro transmission

H24A96EK

WTB for 89 Si Hatchback
rear garnish
seals/grommets for firewall(new or used)
driver side door card (black/drk grey)

01S2king

iTrader: (1)

WTB: ef si seats. can have rip in bolster. pm me thanks

91STDFLOW

Have both kind of garnish, check sig.

brozinic

Would like to buy a 3" downpipe for my b16 turbo, flanges not an problem just needs a good start object!

Stainless steel!

PM!!

BigDare23

Name: Darryl
Location: Durham, NC
Contact: d_baker3@hotmail.com

Up for sell are Skunk2 Springs and no name brand front and rear strut bars for an 88-91 Civic/CRX. I pull them off of my DD to raise it up slightly, and I have no need for the strut bars. The drop is 2.25in on the spring.

Springs



I'm asking $65 picked up for the springs (add $25 for shipping)

Strut bars

I want $20 for both strut bars (no shipping)


If you are interested, email at the address above.

BigDare23

Name: Darryl
Location: Durham, NC
Contact: d_baker3@hotmail.com

I'm just trying to get rid of a few items

88-89 Civic/CRX bumper lens covers that were tinted smoke

$12shipped

88-91 Civic Sun visors

$15shipped

88-91 Civic Front mudflaps

$20shipped

88-89 Civic HB molding

$20shipped

88-00 Civic/90-01 Integra Shifter

$7shipped

cryingsuns

wTB***

1) 1989 Si Front bumper moulding...(the black part in the bumper)
2) Rear panic handle bolt/screw cover
3) Cargo cover button cover lever thing(not sure what it is but it's the thing you click over your cargo cover to hold it in).
4) New cig lighter(with perfect sign)
5) Rear mud flaps that fit 1989 Civic Si


PM with what you got.