1995 Civic EX ABS Cel
#1
Honda-Tech Member
Thread Starter
Join Date: Oct 2009
Location: Southern Cali
Posts: 318
Likes: 0
Received 0 Likes
on
0 Posts
1995 Civic EX ABS Cel
Hello guys today I did my suspension swap for my 1995. From Oem, to Tein Super Street. I did everything I remember correctly and what not. When I finished the swap my ABS light was turned on????? -_- Any hints on what this could be if any one has had it happened to them. It is in my 1995 Civic Sedan EX. Thanks YOU
#2
Honda-Tech Member
Re: 1995 Civic EX ABS Cell
Start off with checking and cleaning your abs sensor, wildoutgsr did a nice write up for you to follow.
https://honda-tech.com/forums/acura-integra-6/%2A%2A%2Ahow-%2A%2A%2A-check-clean-your-rear-abs-wheel-sensor-2205909/
https://honda-tech.com/forums/acura-integra-6/%2A%2A%2Ahow-%2A%2A%2A-check-clean-your-rear-abs-wheel-sensor-2205909/
#3
Re: 1995 Civic EX ABS Cel
Jump the service connector to pull the ABS code. The ABS light will blink the code(s), just like pulling CEL codes.
Last edited by Former User; 02-13-2011 at 05:44 PM.
#5
#6
Honda-Tech Member
Thread Starter
Join Date: Oct 2009
Location: Southern Cali
Posts: 318
Likes: 0
Received 0 Likes
on
0 Posts
Re: 1995 Civic EX ABS Cel
Ok cool I will try that, I just went for a ride and when I start the car, the ABS light truns on and goes away. After I start driving after about 20 seconds it truns on. That usually is a sign of? Also do abs lights turn on if any wheel is loose?
Trending Topics
#9
Honda-Tech Member
Thread Starter
Join Date: Oct 2009
Location: Southern Cali
Posts: 318
Likes: 0
Received 0 Likes
on
0 Posts
Re: 1995 Civic EX ABS Cel
4-2 Circuit of left hand front wheel speed sensor
Thats is the Code that it gave me any ideas? When I was putting the suspension on I pulled the brake and heard a cable pop I was like OOOO lol but when I took a look it was just a rubber part that had broke didnt seem important. I dont know if that has anything to do with it. Thank You.
Thats is the Code that it gave me any ideas? When I was putting the suspension on I pulled the brake and heard a cable pop I was like OOOO lol but when I took a look it was just a rubber part that had broke didnt seem important. I dont know if that has anything to do with it. Thank You.
#11
Honda-Tech Member
Thread Starter
Join Date: Oct 2009
Location: Southern Cali
Posts: 318
Likes: 0
Received 0 Likes
on
0 Posts
Re: 1995 Civic EX ABS Cel
I inspected the sensor and wire, and they seemed to be in really good shape. I am going to try and clean it, but if that does not work I dont think i want to spend that much money on a new speed sensor. Is it worth to just get that off.
#14
Honda-Tech Member
Thread Starter
Join Date: Oct 2009
Location: Southern Cali
Posts: 318
Likes: 0
Received 0 Likes
on
0 Posts
Re: 1995 Civic EX ABS Cel
Today I will be going to get it tested.... I remember pulling the whole brake system and hearing something pop. No lines broke but I know it came from the ABS like in the Front Driver, on the side im getting code. Could that have created a short in the system? What gets me is that nothing seems broken and I inspected it today. The front sensors should be cleanred as well correct?
#15
Honda-Tech Member
Thread Starter
Join Date: Oct 2009
Location: Southern Cali
Posts: 318
Likes: 0
Received 0 Likes
on
0 Posts
Re: 1995 Civic EX ABS Cel
Hey question, I was looking today at wheel speed sensor and I noticed they come with the wire that connects them. That same wire was the one that I pulled and hear a loud pop. My assumption is I caused a short in that wire causing that whole sensor to messed up could I be correct?
#16
at the jetties fishin'
Re: 1995 Civic EX ABS Cel
Thread
Thread Starter
Forum
Replies
Last Post
LS1powered
Honda Accord (1990 - 2002)
3
04-27-2006 09:13 PM