REDBARON

Hey my brother has a ZC rex that he now wants to go turbo in. I'm trying to find out what he's going to need to accomplish this. Or what setup you are currently running with your ZC. Money is definitely going to be a factor so he's trying to go the cheapest yet most reliable way. Thanks in advance guys.

sgT

I installed a turbo on a ZC with a greddy kit.
The IC piping was a chore but came out pretty good.

b18bvudoo

my cousin has a zc hatch w/ drag3. i think he had connections tho 'cause his kit+install was ~2300.

REDBARON

Does Drag make a specific kit for the ZC? Or anyone for that matter? Or is everyone just making a custom kit? What all is needed for a custom kit anyway?

Dee

I do BUT the kit is an old school Greddy TD04 (it's so cute) Kit! You should be able to order a Kit for a D16 since the exhaust ports are the same.

Ben Huynh

iTrader: (6)

We've never prototyped a kit for the ZC motor so we don't know how it would fit.

sgT

Its pretty much the same as a regular D16. Its akin to the D16A1 if you wanted
something USDM to compare to. The manifold bolts right up, however the ports
dont line up perfectly. A grinder can fix this problem but it will work fine without
the modification. everything else is pretty much the same as a d16

JJ-Built

hey guess what, i got a first gen. integra with the greddy kit it and it still runs.
i had the kit since 96 now the paint is peeling off and the car is for sale.


[Modified by jjgotboost, 1:39 AM 12/13/2001]

Ben Huynh

iTrader: (6)

Assuming the manifold bolts up, everything else will fit just fine. How well does the manifold bolt up?

93LSivic

Here you go man, this should help you and your brother out.
http://zcturbo.tripod.com/id30.htm
Thank me later....When he no longer reads vacuum under WOT

REDBARON

Thanks for all the info guys.

VTC_CiViC

Just go with the GReddy kit. It was initially designed for the ZC motor (a little DYK there), and then applied to the D16, it'll work fine on a ZC though.